42
Vapodest 45s
10 Rework instruction
10.1. Upgrade the Vap 45s to be operated with external titrator
In case you have ordered the Vapodest 45 without titrator and now, wish to up-
grade your unit to be used with an external titrator, we kindly ask you to follow the
instructions enclosed:
- Take off platform pos 2. and PVC tube holder
pos. 1
- Slide the fitting of the receiver pos. 3 on the fitting
and attach it with the screw enclosed (M3 x 20).
- Attach receiver glass pos. 8 under the receiver
table. Move the receiver glass for about 90°, in
order to attach it.
- Silicone tubing for the addition of boric acid pos.
7 and Slide silicone tubing of the distillate outlet
tubing pos. 4 through the opening into the titration
cell (shorten tubing so that they will end shortly
above the glass bottom).
- Remove protective cap from the connection pos.
6. Put Verprene tubing for the suction on the
connection and join with the respective Teflon
connection.
- Establish plug-in connection:
Connect 5-pos. Drehverschlussstecker pos. 5
- Set up titrator and connect:
See chapter "4.9. Connect titrator and electrode"
- Connect electrode.
See chapter "4.9. Connect electrode and titrator“
- Change system settings
To make sure that the Vapodest recognizes that
an external titrator has been connected, you must
make a selection in the menu "Titration".
See chapter "6.5. Titration
