Administrator Mode
4
Overlay with:
Select one or more of the options below to be overlaid on the live view and
recorded videos. Use the drop-down list to select the display position.
Camera Name
Date
System Time
[Watermark Setting]
Enable this option to watermark all recordings. The watermark allows you to verify whether
the video has been tampered while it was recorded. Note this function is not available in
GV-LPC2211 / 2011
. See
5.4 Verifying Watermark
.
[TV Out]
Select the signal format for the video output of the camera as either
NTSC
or
PAL
. This
function is disabled by default. Note this function is not available for
GV-IP LPR Camera 5R
and
GV-LPC2211 / 2011
.
Note:
For smooth live view display of
GV-IP LPR Camera 5R / GV-LPC1100
on TV monitor,
the video resolution must be of 1280 x 1024 or lower. If dual streams are enabled, the sub
stream must be set to 640 x 480.
[LED Control]
Ready LED:
Select
Disable
if you do not wish to use the Status LED. Note this function is
only available for
GV-LPC1100
and
GV-LPC2210 / 2211 / 2011
.
[Special View Setting]
Note this function is only available for
GV-LPC2210 / 2211 / 2011
..
D/N:
Sets the sensitivity of day-night mode switch. The higher the sensitivity value, the
more sensitive the switch is from day mode to night mode. The default value is 5.
Auto:
Select
Auto
for the camera to detect the amount of light present and
automatically switch to monochrome in a poorly-lit scene. Move the slider to adjust
the sensitivity level from 0 to 10.
Black and White:
Select this option for the live view to be in monochrome.
Color:
Select this option for the live view to be in color.
85
