56
4. Cut the 2 silica gel bags apart with scissors and insert the new silica gel bags
.
Figure 1-64
5. Secure the 2 hexagon pillars to the upper and lower holes of camera module as
indicated below.
Figure 1-65
6. Secure the camera cover.
Note:
1. The silica gel bag must be placed at the lower half of the camera body.
2. The silica gel loses its effectiveness when the dry camera is opened. To prevent the
lens from fogging up, replace the silica gel bag every time when you open the camera
and conceal the gel bag in the camera within two minutes of exposing to the open air.
