Second Shaft
You can adjust the camera body up and down by 90, 112.5, 135, 157.5 or 180 degrees by
using the gears inside the camera body and the camera base.
1. Unscrew the tilting lock screw with the torx wrench.
Torx Wrench
Tilting Lock Screw
Figure 1-5
2. Hold the camera body, and move the camera base to the right to separate the camera
gears.
Camera Gears
Move the Camera
Base to the Right
Camera Body
Figure 1-6
3. Adjust the angle of camera body to 90°, 112.5°, 135°, 157.5° or 180°. Then move the
camera base to the left to combine the gears.
90°
112.5°
180
°
157.5°
135°
Figure 1-7
4. Fasten the tilting lock screw.
8
