Introduction
1
1.2.6 Replacing the Silica Gel Bag
Once the housing of GV-LPC1100 is opened, you must replace the original silica gel bag with
a new one.
1. Loose the screws holding the camera’s lid with the torx wrench.
Figure 1-22
2. Open the camera’s lid and you will find a silica gel bag attached to the interior of the lid.
Silica Gel Bag
Figure 1-23
3. Remove the silica gel bag and place a new bag back to its original position.
4. Fasten the camera’s lid within 2 minutes of replacing the silica gel bag.
IMPORTANT:
1. The silica gel loses its effectiveness when the dry camera is opened. To prevent the lens
from fogging up, replace the silica gel bag every time when you open the camera and
conceal the gel bag in the camera within two minutes of exposing to the open air.
2. GV-LPC1100 currently does not support recording to Micro SD card or Mini USB
function.
21
