Introduction
1
1.5.4 Device Installation
1.5.4.1 Installation Guidelines
To produce quality image and to avoid software recognition errors, make sure you adhere to the
guidelines when installing your GV-LPC2211/2011. See
GV-LPR Camera Installation Guide
.
1.5.4.2 Installing the Camera
1. Slide the sun-shield cover onto the top of the camera. You can also secure the sun
shield cover onto the back of the camera. Adjust the position of the cover before fully
securing the cover with the washer and the screw.
Figure 1-49
Figure 1-50
Note:
1. The GeoVision logo on the sun-shield cover should be closer to the front of the
camera.
2. There are two holes for the screws at the back of the camera. You only need to
fasten one screw to secure the sun shield cover.
49
