[Detection Mode]
From the drop-down list on top left, select a method to activate license
plate recognition.
Disable:
Deactivate recognition.
Motion (Stationary Camera):
Activate recognition by motion detection. Select this
mode if your camera is fixed at one place.
Motion (Mobile Camera):
Activate recognition by motion detection. Select this option if
your camera is not fixed at one place or is installed on a vehicle.
Motion (Continuous Recognition):
Activate round-the-clock recognition.
Parking (I/O):
This option is designed for parking areas. The recognition is activated by
input triggers at the parking area. Select which inputs will trigger recognition in the
I/O
Mode Setting
section below.
Parking (Motion):
This option is designed for parking areas. The recognition is
activated by motion detection at the parking area. Select this option if the parking area
is without a gate installed to trigger the recognition.
If the recognition is still repeating, it will notify after the specified second:
Select
this option to avoid multiple recognition results for the same license plate due to the
position of the camera. Specify the duration of a recognition result to be displayed if the
next license plate recognized is the same as the previous one.
[Motion Detection Setting]
Output recognition result quickly (It will increase error rate of recognition
system):
Select this option if you want to have a faster recognition result at the cost of
accuracy. This option is suitable for a large amount of traffic and the frames received
will go through a fast recognition process (approximately at the processing rate of 1
frame per second).
Detected Sensitivity:
Select the sensitivity level of motion detection from the
drop-down list. The default value is set to 5. The higher the value, the more sensitive
the system is to the motion.
Detected Object Size:
Select the value of the targeted object’s normal size. The
default value is set to 1. The higher the value, the bigger the object’s size is.
92
