Administrator Mode
4
4.2 I/O Control
Note this function is only supported by cameras with I/O function. You can connect your
camera to other I/O devices with the I/O wires for extensible connection. Strip the desired
wires first, and connect the auxiliary devices with the right wires according to the assignments
to the wires in
1.3.5.3 Wire Definition
.
4.2.1 Input Settings
To activate the sensor input, select
Enable
.
Figure 4-13
Normal State:
You can set the input state to trigger actions by selecting
Open Circuit
(N/O)
or
Grounded Circuit (N/C)
.
Latch Mode:
Enable this option to have a momentary output alarm.
Trigger digital output relay:
When this option is enabled, the output will be triggered
once the input is activated.
Send Video to Center V2:
Enable this option to send the images to Center V2 when the
input is triggered.
103
