GeoVision GV-FE2302 User Manual Download Page 119

Page: 119 / 200

Administrator Mode

4.5.2 I/O Monitoring Settings

You can set the schedule for I/O monitoring to start.

Note:

The I/O Monitoring Settings are only supported for GV-FE2301 /421 / 4301 / 521.

Figure 4-23

Span 1-3:

Set different time spans during the day to enable I/O monitoring. Each day

can be divided into 3 time spans, shown as Span 1, Span 2, and Span 3. The time
span settings will work from Monday through Sunday.

Weekend:

Enable this option to start I/O monitoring all day on the weekend and select

whether your weekend includes

Saturday and Sunday

Only Sunday

Special Day:

Enable I/O monitoring on a specified day.

Note:

In Recording Schedule and I/O Monitoring Schedule, if the settings for Special

Day conflict with those for Span 1-3 or Weekend, the Special Day settings will get
priority.

105

Summary of Contents for GV-FE2302









































































































































































































Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands

GeoVision GV-FE2302, User Manual

Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands