GeoVision GV-FE2302 User Manual Download Page 169

Page: 169 / 200

Advanced Applications

4. By default, downloads are saved to

:\GvSDCardSync

and are not recycled automatically.

To configure the storage and recycling settings, select the

Storage

tab on the Setting

window. This page appears.

Figure 6-18

[Recycle]

Recycle when the storage space is less than (GB):

Specify a minimum free space

of your local storage for file recycling.

Keep the downloaded files for (Days):

Specify the number of days to keep the

download files at the local hard drive.

[Storage Location]

To configure the storage path, click the button next to the location field and specify a
storage location.

5. Click

to save the configuration or exit the Setting window.

Note:

Keep the GV-SDCardSync Utility running in the background to automatically

synchronize and download videos.

155

Summary of Contents for GV-FE2302









































































































































































































Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands

GeoVision GV-FE2302, User Manual

Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands