GeoVision GV-FE2302 User Manual Download Page 44

Page: 44 / 200

1.7.3 GV-FE2302 / 3402 / 3403 / 5302 / 5303

Figure 1-26

Remove the camera cover with the supplied torx wrench.

Supply power and network to the camera with one of the following methods:

Power adapter (optional):

plug in the power adapter (optional) and connect a

standard network work cable.

Power over Ethernet (PoE):

connect the camera to a PoE switch with a standard

network cable to supply power and network.

PoE Converter:

this method is only applicable to indoor GV-Fisheye Camera

installed with an IR LED ring (GV-FE3403 / 5303). A PoE converter allows the

camera to be connected to a PoE switch (thus supplied with network and power

over a network cable), and also supplies power to IR LED ring. For installation

steps, see

1.7.4 Connecting PoE Converter and IR LED Ring for GV-FE3403 /

5303

Optionally insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).

Optionally connect an external speaker.

Optionally connect a GV-WiFi Adapter (for WiFi accessibility) or an external USB hard

drive (for additional storage).

Secure the camera cover with the supplied torx wrench.

Note:

For details on the limitations and requirements of mini USB port, refer to

Note for

USB Storage and WiFi Adapter

at the beginning of this manual.

Summary of Contents for GV-FE2302









































































































































































































Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands

GeoVision GV-FE2302, User Manual

Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands