Administrator Mode
4
[HTTP Port Settings]
The HTTP port enables connecting the camera to the web. For
security integration, the Administrator can hide the server from the general HTTP port by
changing the default HTTP port of 80 to a different port number within the range of 1024
through 65535.
[HTTPS Settings]
By enabling the HTTPS settings, you can access the camera through a
secure protocol. You can use your own generated Certificate and Private Key or ones
verified by the SSL authority. Click
Browse
to locate the Certificate file and Private Key file,
and type the password if the .pem files are protected by a password. Click
Apply
. The Web
interface will be restarted automatically and you will need to log in again.
Note:
Only .pem file format is supported for Certification and Private Key.
[GV-IPCAM Streaming Port Settings]
The VSS port enables connecting the camera to the
GV-System. The default setting is 10000.
[UPnP Settings]
UPnP (Universal Plug & Play) is a networking architecture that provides
compatibility among networking equipment, software and peripherals of the 400+ vendors
that are part of the Universal Plug and Play Forum. It means that they are listed in the
network devices table for the operating system (such as Windows XP) supported by this
function. Enabling this function, you can connect to the camera directly by clicking on the
camera listed in the network devices table.
[QoS Settings]
The Quality of Service (QoS) is a bandwidth control mechanism that
guarantees delay-sensitive data flows such as voice and video streams, obtain a certain
amount of bandwidth to keep the streaming smooth.
To apply QoS to the fisheye camera, all network routers must support QoS and QoS must be
enabled on these devices. To enable the QoS on the camera, enter a Differentiated Services
Code Point (DSCP) value. This value is a field in an IP packet that enables different levels of
services for the network traffic. When the video stream from the camera reaches a router,
the DSCP value will tell the router what service level to be applied, e.g. the bandwidth
amount. This value ranges from 0 to 63 in decimal format. The default value is 0, meaning
QoS is disabled.
113
Summary of Contents for GV-FE2302
Page 140: ...Figure 4 37 2 126 ...
