[FTP-Alarm Settings]
Motion Detection:
Once motion is detected on the camera, a still image will be sent to
the FTP Server.
~
Continuously send images upon trigger events (Motion):
A sequence of
snapshots is uploaded to the FTP Server when motion is detected on the camera.
Digital Input:
When the input is triggered, a still image will be sent to the FTP Server.
~
Continuously send images upon trigger events (Input):
A sequence of snapshots
is uploaded to the FTP Server when the input is triggered.
Important:
1. To send FTP alert upon motions, be sure to set up the detection area on the Motion
Detection page.
2. Digital I/O settings are only supported by GV-FE2301 / 421 / 4301 / 521.
[Act as FTP Server]
Enable FTP access to GV-IPCAM:
The camera acts as an FTP server, enabling users
to download AVI files. The memory card must be inserted for the camera to act as an
FTP server.
Use alternative port:
The default port is set to 21.
To access the internal FTP server through a web browser, type the IP address or the domain
name of the camera in your browser like this:
ftp://192.168.0.10
When prompted for Username and Password, type the default username
ftpuser
and the
default password
123456
. Then you should find the AVI files recorded after trigger events.
To change login information of the internal FTP server, see
4.8.4 User Account
. For the
related settings to send FTP alerts, see
4.1.2 Motion Detection
,
4.2.1 Input Settings
and
4.4
Monitoring
.
92
Summary of Contents for GV-FE2302
Page 140: ...Figure 4 37 2 126 ...
