GeoVision GV-FE2302 User Manual Download Page 101

Page: 101 / 200

Administrator Mode

4.2 I/O Control

The I/O wires connected to the camera provide the interface for one input device and one
output device.

Note:

The I/O settings are only supported by GV-FE2301 / 421 / 4301 / 521.

4.2.1 Input Settings

To activate the sensor input, select

Enable

Figure 4-11

Normal State:

You can set the input state to trigger actions by selecting

Open Circuit

(N/O)

Grounded Circuit (N/C)

Latch Mode:

Enable this option to have a momentary output alarm.

Trigger digital output relay:

When this option is enabled, the output will be triggered

once the input is activated.

Record:

Enable this option to start recording when the input is triggered.

Send Video to Center V2:

Enable this option to send the images to Center V2 when the

input is triggered.

Note:

Triggering the output, recording the images and sending video to Center V2 are

enabled only after you start

Input

monitoring manually or by schedule. To configure the

input monitoring, see

4.4 Monitoring

Summary of Contents for GV-FE2302









































































































































































































Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands

GeoVision GV-FE2302, User Manual

Search results

Summary of Contents for GV-FE2302

Reviews:

Related manuals for GV-FE2302

Brands by name

Popular brands