GeoVision GV-FE2302, User Manual

Page: 144 / 200

Chapter 5 Recording and Playback
The camera can record video and audio directly to the memory card. You can play back the
recorded files on the GV-System or over the TCP/IP network.
Note: See Note for Recording at the beginning of the manual.
5.1 Recording
To enable the recording function:
1. Insert the memory card to the camera. See “To add a memory card,” 4.8.3 Storage
Settings .
2. If you want to set up pre-recording, post-recording or audio recording, see 4.1.1 Video
Settings .
3. If you want to set up the schedule for video recording or I/O monitoring, see 4.5
Recording Schedule .
4. If you want to configure the areas and sensitivity values for motion detection, see 4.1.2
Motion Detection .
5. If you want the recording to be triggered by input device, configure the operation of I/O
devices. See 4.2.1 Input Settings .
6. To start recording and I/O monitoring, see 4.4 Monitoring .
The camera will start recording in case of motion detection, I/O trigger, or during the
scheduled time.
130