background image

Use of the product without instruction.

Use outside of the intended use and limits.

Disabling safety systems.

Removal of hazard notices.

Opening the product using tools, for example screwdriver, unless this is permitted for cer-

tain functions.

Modification or conversion of the product.

Use after misappropriation.

Use of products with recognisable damages or defects.

Use with accessories from other manufacturers without the prior explicit approval of

GeoMax.

Inadequate safeguards at the working site.

Aiming directly into the sun.

1.3

Limits of Use

Suitable for use in an atmosphere appropriate for permanent human habitation: not suitable for

use in aggressive or explosive environments.

WARNING

Working in hazardous areas, or close to electrical installations or similar situations.
Life Risk.
Precautions:

Local safety authorities and safety experts must be contacted by the person responsible for

the product before working in such conditions.

1.4

Responsibilities

GeoMax AG, CH-9443 Widnau, hereinafter referred to as GeoMax, is responsible for supplying

the product, including the user manual and original accessories, in a safe condition.

The person responsible for the product has the following duties:

To understand the safety instructions on the product and the instructions in the User Man-

ual.

To ensure that it is used in accordance with the instructions.

To be familiar with local regulations relating to safety and accident prevention.

To inform GeoMax immediately if the product and the application becomes unsafe.

To ensure that the national laws, regulations and conditions for the operation of the product

are respected.

1.5

Hazards of Use

NOTICE

Dropping, misusing, modifying, storing the product for long periods or transporting the

product
Watch out for erroneous measurement results.
Precautions:

Periodically carry out test measurements and perform the field adjustments indicated in the

User Manual, particularly after the product has been subjected to abnormal use as well as

before and after important measurements.

Reasonably foreseeable

misuse

Environment

Manufacturer of the prod-

uct

Person responsible for the

product

Safety Directions

7

Summary of Contents for 6017094









































































Reviews: