GeoMax 6017094 User Manual Download

Page: 32 / 72

4.4

Setting up for Remote Control (with the RadioHandle)

9856_002

Prism

Prism pole

Field controller with Bluetooth

Holder

RadioHandle

Instrument

Tripod

4.5

Connecting to a Personal Computer

Microsoft ActiveSync (for PCs with Windows XP operating system) or Windows Mobile Device

Center (for PCs with Windows Vista or Windows 7/Windows 8/Windows 10 operating system) is

the synchronisation software for Windows mobile-based pocket PCs. Microsoft ActiveSync or

Windows Mobile Device Center enables a PC and a Windows mobile-based pocket PC to commu-

nicate.

Start the computer.

Download the GeoMax Zoom70/90 USB driver from the GeoMax download page.

Run the Setup_GeoMax_USB_xx.exe to install the drivers necessary for GeoMax

Zoom70/90. Depending on the version (32 bit or 64 bit) of the operating system on

your computer, you have to select between the three setup files following:

•

_USB_32bit.exe

•

_USB_64bit.exe

•

_USB_64bit_itanium.exe

The InstallShield Wizard window appears.

☞

Ensure that all GeoMax devices are disconnected from your computer

before you continue!

Click Next>.

The Ready to Install the Program window appears.

Install. The drivers are installed on your computer.

☞

For computers with Windows Vista or Windows 7/Windows 8/

Windows 10 operating system: If not already installed, Windows Mobile

Device Center is installed additionally.

The InstallShield Wizard Completed window appears.

Check I have read the instructions and click Finish to exit the wizard.

Setup for remote control

with the RadioHandle

☞

Install GeoMax

Zoom70/90 USB drivers

Operation

Summary of Contents for 6017094









































































Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands

GeoMax 6017094, User Manual

Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands