GeoMax 6017094 User Manual Download Page 2

Page: 2 / 72

Introduction

Congratulations on the purchase of the GeoMax Zoom70/90.

This manual contains important safety directions as well as instructions for setting up the prod-

uct and operating it. Refer to "1 Safety Directions" for further information.

Read carefully through the User Manual before you switch on the product.

The content of this document is subject to change without prior notice. Ensure that the product

is used in accordance with the latest version of this document.

Updated versions are available for download at the following Internet address:

https://partners.geomax-positioning.com/downloads_v2.htm

The model and serial number of your product are indicated on the type plate.

Always refer to this information when you need to contact your agency or GeoMax authorised

service centre.

•

Windows is a registered trademark of Microsoft Corporation in the United States and other

countries

•

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

•

SD Logo is a trademark of SD-3C, LLC.

All other trademarks are the property of their respective owners.

This manual applies to the Zoom70/90 instruments. Differences between the various models are

marked and described.

Name

Description/Format

Zoom70/90

Quick Guide

Provides an overview of the product together with technical

data and safety directions. Intended as a quick reference

guide.

Zoom70/90

User Manual

All instructions required in order to operate the product to a

basic level are contained in the User Manual. Provides an

overview of the product together with technical data and

safety directions.

Purchase

☞

Product identification

Trademarks

Validity of this manual

Available documentation

Summary of Contents for 6017094









































































Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands

GeoMax 6017094, User Manual

Search results

Summary of Contents for 6017094

Reviews:

Related manuals for 6017094

Brands by name

Popular brands