Genovation, Inc.
25
MiniTermPro
Up to two Shift and Toggle keys each can be assigned. One Alpha shift key can
be assigned.
Auto Repeat Enable: Each key on the Mini-Terminal 9xx can be individually
selected to auto-repeat. When programming a key, the checkbox below the level
tabs on the graphic keyboard labeled "This macro can auto-repeat" will
determine if the MiniTerm key selected will auto-repeat. If this box is not
checked, the macro will not repeat when the key is held down.
Advanced Key Data Editing
(Line Edit Mode)
In Line Edit mode you should:
o
Assign one key to perform a Backspace function
, and
o
Assign one key to perform an Enter function
.
The Backspace key allows the user to edit their input. The Enter key terminates
user input and is replaced with the Tail Character you selected in the global
Keypad Properties panel.
Optionally, a Delete key (7F hex) can be included to erase all
user input.
Transmit this key (don’t buffer): In Line Edit mode, when the user presses a key
programmed with a character (something other than Backspace, Enter and
Delete), that character will show up on the LCD as part of the input/edit buffer.
This allows the user to edit the value before hitting Enter and sending it to the
host. If you would like to have special keys bypass the buffer and go straight to
the host computer, then click on the “Transmit this key” checkbox.
If the user presses one of those keys then the ASCII data is sent immediately to
the host and the line edit buffer is unaffected.
