Genovation, Inc.
10
MiniTermPro
Check the “
Launch Genovation MiniTermPro”
box if you want to run the
application immediately.
Click
Finish
to complete the installation.
The Setup procedure will create an item in the Startup folder that automatically
starts MiniTermPro every time you start your computer.
When the MiniTermPro application is running, you will see the MiniTermPro icon
in the system tray.
Install Hardware
MiniTermPro is very forgiving with regard to adding new hardware. You may
plug in new hardware at any time. If you have not already plugged in your
MiniTerm 9xx device(s), do so now. Please wait for the device to be identified by
the PC.
Select Virtual COM Port (Genovation USB Virtual Serial mode)
Right click on the icon located in the system
tray and select
Configure MinTerms
from the
context menu.
When the
Attention
reminder dialog appears,
click
OK
to dismiss it. You will then see a
screen such as shown on the next page (see
MiniTerm #3). This is how you assign a COM
port to the MiniTerm.
IMPORTANT!
In Genovation’s standard Virtual Serial mode
2
,
the COM port you
choose will be tied to the USB jack on your PC
(or USB HUB), so if you
remove your keypad, make sure to re-plug it into the same USB jack. If you use
a HUB we recommend it be of self-powered type (uses an AC adapter).
2
The USB CDC class driver host mode uses the keypad serial number to assign the COM Port.
