Genius VividPro II, User Manual

Page: 14 / 91

Chapter II. Software Setup
7
B
efore installing the scanner software, make sure
that the scanner is properly connected as described in
Chapter I, Hardware Installation .
Software Installation
Requirements
Your scanner comes with scanner software, OCR
software, image-editing software, the scanners driver,
and TWAIN software. All of this software uses
approximately 100 megabytes of hard disk space after
it is installed into your computer. To ensure ample
room for the installation, as well as for scanning and
saving images, a minimum of 250 megabytes of hard
disk space is recommended.
Software Installation
The installation program called INSTALL.EXE
on the installation CD-ROM must be run from within
Microsoft Windows. Once Windows is running on
your system, please follow the steps below to properly
install the software:
1. Insert the installation CD-ROM into its disk drive.
2. For Windows 95/98, Windows NT4.0
WorkStation users:
The auto-run sequence will begin.
For Windows 3.1x users:
From the program manager, choose FILE,
RUN and enter the letter of the CD-ROM
drive, a colon and INSTALL (i.e.,
D:INSTALL).
3. Follow the on-screen instructions carefully to
properly install the scanners software into your
computer.
Software Setup Troubleshooting
Carefully review the steps outlined in this guide
and the Quick Installation Guide that accompanied
your scanner. If you still need support, you may
contact us through one of three methods listed on the
last page of this guide.