Genius VividPro II, User Manual

Page: 34 / 91

Chapter IV. The TWAIN Interface
27
Choosing TWAIN
To select the TWAIN interface: From your
TWAIN compatible program, locate the scanner setup
or TWAIN source option usually listed under the
FILE menu and choose the appropriate TWAIN
source for your scanner.
Note for Windows 95/98, Windows NT4.0
WorkStation users only: The 16-Bit source is for
scanning from 16-bit applications (Windows 3.1x
native architecture), and the 32-bit source is for
scanning in 32-bit applications (Windows 95/98,
Windows NT4.0 WorkStation native architecture).
Your scanner comes with 32-bit scanning applications
for Windows 95/98, Windows NT4.0 WorkStation,
and 16-bit scanning applications for Windows 3.1x.
However, if you are using a 16-bit scanning
application inside Windows 95/98, Windows NT4.0
WorkStation, you must select the 16-bit TWAIN
source for your scanner to properly function.
TWAIN Dialog Box Features
Source This option may appear
depending on the type of scanner
being used. There are three
possible sources listed:
•
Normal - Use this setting for
normal scanning of images that
are not on transparencies or
photo negatives.
•
Transparency - Use this mode
if you are scanning
transparencies.
•
Negative - Use this mode if you
are scanning negatives.
Scan Mode This is where you inform the
scanner of the type of document you wish to
scan. It is very important that you set the