Genie CCTV AC7000SC User Manual Download Page 6

Page: 6 / 74

AC-7000 User guide

Before use

1.1. Safety precautions



Warning

Handling with wet hands or
allowing liquid to flow into it
is prohibited.

-> It may cause an

electric shock or damage.

Do not place a fire source

near the terminal.

-> It may cause a fire.

Do  not  disassemble,  repair,
or  modify  the  terminal  at
discretion.
->  It  may  cause  an  electric
shock, fire or damage.

Keep  out  of  reach  of
children.
->  It  may  cause  an
accident or damage.

If the above warning is ignored, it may result in death or serious injury.



Cautions

Keep away from direct
sunlight
->

may

cause

deformation

color

change.

Avoid  high  humidity  or
dust
->  The  terminal  may  be
damaged.

Avoid

using

water,

benzene,

thinner,

alcohol for cleaning

-> It may cause an electric
shock or fire.

Do not place a magnet
close to the terminal.
-> The terminal may
break

down

malfunction.

Do not contaminate the
fingerprint input area.
-> Fingerprints may not be

well recognized.

Avoid using insecticide or
flammable spray near the
terminal.
->

may

result

deformation

color

change.

Avoid impacts or using
sharp

objects

the

terminal.
-> The terminal may be

damaged and broken.

Avoid severe temperature
changes
-> The terminal may be

broken.

- If the above cautions are ignored, it may result in property loss or human injury.

※

Under no circumstances will UNION COMMUNITY be responsible for accidents or

damages caused by inappropriate use of the product without referring to the user
manual.

Summary of Contents for AC7000SC











































































Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands

Genie CCTV AC7000SC, User Manual

Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands