Genie CCTV AC7000SC User Manual Download Page 67

Page: 67 / 74

AC-7000 User guide

It is the function used for data backup of the terminal

by [Export], and you can copy the backup data from

the [Export] into the terminal again.

▶

Export

It copies the data from the terminal to the external SDcard.

-User data: It copies the user DB to the „AC7000/db‟ folder of the SDcard.

-System option: The option setting value of the terminal is copied to the „AC7000/config‟

folder.

-Event log: It copies the authorization log DB to the „AC7000/db‟ folder of the SDcard.

-Export all: It copies all the user‟s data and event log to the „AC7000/db‟ folder of the

SDcard.

-Photo data: The image log data is saved in the „AC7000/logimage‟ folder of the SDcard,

and the photo data of the user is saved in the „AC7000/userphoto‟ folder of the SDcard as

jpg file.

▶

Import

It copies the data from the SDcard to the terminal

- User data: The user‟s DB saved in the SDcard(„AC7000/db‟ folder) by export is copied

to the terminal

- System option: The option setting values of the terminal saved in the

SDcard(„AC7000/config‟ folder) by export is copied to the terminal.

If you fulfilled the import and if you want to apply the new DB or setting value, you should

reboot the terminal

ETC.

-Theme: The voice file in the „AC7000/audio‟ folder in the SDcard is copied to the terminal.

If you want to replace the authorization success (user_ok.mp3) and the authorization fail

(user_fail.mp3) message with the user voice, you can play the user voice by copying with

Summary of Contents for AC7000SC











































































Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands

Genie CCTV AC7000SC, User Manual

Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands