Genie CCTV AC7000SC User Manual Download Page 41

Page: 41 / 74

AC-7000 User guide

the characters can be up to 9 digits.

If you touch the item you want to change, the

keypad appears at the bottom.

If the input is finished with the keypad, continue the
input by touching [

] button or the next input

window. If you touch the background window

which is not the input window, the keypad

disappears.

If you want to apply the changes, click [Complete]

button, and return to the previous menu by clicking

[BACK] button.

3.5. Application mode

3.5.1. Application mode

If you select the

[Application mode]

in the main menu, the following window appears.

In the application mode, you can select the

[Entrance control/ Attendance

management/ Meal personnel management]

according to the purpose.

3.5.1.1. Entrance control or attendance management setting

Summary of Contents for AC7000SC











































































Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands

Genie CCTV AC7000SC, User Manual

Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands