Genie CCTV AC7000SC User Manual Download Page 62

Page: 62 / 74

AC-7000 User guide

▶

Basic setting : Same with the window at the left

side.

▶

Message display (ms unit)
It sets the time for which the authorization result

window to be displayed.

0~5000 is available for the value, and the

authorization result window appeared and

disappear for the duration.

Because it is set in ms unit, if you want to set 2

seconds, you should set 2000

Click [OK] button to apply the set value, and click [BACK] button to cancel and return.

3.9. Terminal information

3.9.1. System information

If you select the

[Terminal info]->[System]

in the main menu, the following window

appears.

▶

System info
The hardware and firmware version of the terminal

is shown.

▶

Hard disk (using/all)
It shows the using amount of the hard disk.

If the using amount is high, it is represented in red.

▶

Ram (using/all)
The using amount of Ram among the all amount is

represented.

If the using amount is high, it is represented in red.

Summary of Contents for AC7000SC











































































Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands

Genie CCTV AC7000SC, User Manual

Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands