Genie CCTV AC7000SC User Manual Download Page 58

Page: 58 / 74

AC-7000 User guide

window appears.

▶

Basic setting : Same with the window at the left

side.

▶

RS232 option: It sets the device connected to RS232 port

-None: When there is no device connected to the RS232 port

-Attendance ticket/Meal ticket: The authorization result is printed when the

authorization is successful. The terminal ID, user ID, authorization time, and

authorization mode are printed by the printer connected to the RS232 port.

The printing format differs from the setting, and the terminal name becomes the title

on the top side when setting as [Meal ticket]. The printer used to print ticket is

“SRP-350} serial type model.

▶

RS485 option: It sets the connecting device to RS485 port.
-None: When there is no device connected to RS485.

-LC010: When LC010 is connected.

-LC015: When LC015 is connected.

-SR100: When SR100 is connected.

▶

Site code
It sets the sitecode value sent in Wiegand output below.

▶

Wiegand Output

It is used only when the special controller is equipped running by the Wiegand input.
When the authorization is finished, the data of the following format is sent to the

Wiegand port of the terminal.

None

General case. It does not use Wiegand out port.

Summary of Contents for AC7000SC











































































Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands

Genie CCTV AC7000SC, User Manual

Search results

Summary of Contents for AC7000SC

Reviews:

Related manuals for AC7000SC

Brands by name

Popular brands