manualshive.com logo in svg

Genex GX9000, User Manual, Page: 61 / 64

Share
Download
Genex GX9000 User Manual Download Page 61

GX9000 User manual 

Rev 2.1 

Upgrading with New Software 

Genex Audio Inc 

 

Page 64 

What to do if the Download Procedure Fails! 

•

 

If the download is stopped before completion for any reason, for example 
the USB cable is accidentally removed, switch the GX9000 off and after a 
short interval turn it back on. 

•

 The 

message 

Waiting For Code

 will be displayed in the alpha-

numeric display. 

 

•

 

Connect a PC running the GRU download utility to the GX9000 using a 
USB cable 

•

 

Unzip the supplied gx9000.zip to extract a file called gx9000.p 

•

 

Run the GRU download utility. 

•

 Use 

the 

Browse

 button to specify the file GX9000.p 

•

 Click 

the 

GX9000

 button 

•

 

A confirmation window will appear. Click OK. 

•

 The 

message 

Erasing Sector --

 will appear on the front panel 

of the unit for a few seconds, followed by the Download Progress bar on 
the GRU. 

•

 

The download process should take approximately 1 minute. 

•

 

At the message “Download complete”, switch off the unit, wait for about 
10 Seconds and switch it on again.  

 

Summary of Contents for GX9000

































































Reviews:

No comments