GX9000 User manual
Rev 2.1
Metering and the Display
ing and the Display
PPM Scale
PPM Scale
3
Display
T
3
.
FinePPM
UV
Normal
-22dB +/-1
-20dB +/-1
-18dB +/-1
-16dB +/-1
You can expand the PPM scale to cover just 2dB from the top to the bottom,
for the purposes of calibration of internal and external ADC’s. The centre
pixel can be programmed to represent either –16dBFS, -18dBFS, -20dBFS or
-22dBFS.
You can expand the PPM scale to cover just 2dB from the top to the bottom,
for the purposes of calibration of internal and external ADC’s. The centre
pixel can be programmed to represent either –16dBFS, -18dBFS, -20dBFS or
-22dBFS.
In Expand mode two pixels light for each PPM column until the incoming level
is aligned. One pixel shows the incoming level and the centre pixel flashes
until the incoming level matches the alignment level. If the incoming level is
outside of the expanded range, the bottom or top pixel stays lit to indicate the
direction of the error.
In Expand mode two pixels light for each PPM column until the incoming level
is aligned. One pixel shows the incoming level and the centre pixel flashes
until the incoming level matches the alignment level. If the incoming level is
outside of the expanded range, the bottom or top pixel stays lit to indicate the
direction of the error.
Expand mode can be cancelled by selecting
Normal
.
Expand mode can be cancelled by selecting
Normal
.
•
Press
the
Setup
button.
•
Press
the
Setup
button.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
buttons
to select the
Display | .FinePPM
menu heading.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
buttons
to select the
Display | .FinePPM
menu heading.
•
Press
the
Value Up
and
Value Down
buttons to select one of the four
scales.
•
Press
the
Value Up
and
Value Down
buttons to select one of the four
scales.
•
Press
the
Enter
button to enter Fine PPM mode.
•
Press
the
Enter
button to enter Fine PPM mode.
Frames on/off
Frames on/off
This heading allows the user to not display the frames segment of the
Timecode display. Some users prefer to not display these characters to make
the timecode more readable.
This heading allows the user to not display the frames segment of the
Timecode display. Some users prefer to not display these characters to make
the timecode more readable.
3
Display
T
3
.
Frames
UV
Off
On
Genex Audio Inc
Page 60
Genex Audio Inc
Page 60