GX9000 User manual
Rev 2.1
The Take Logging System
Entering Cue Points
Entering Cue Points
Cue points can be entered in playback or record. In Playback, cue points are
inserted in the current cue list. In Record, cue points are appended to the
current cue list.
Cue points can be entered in playback or record. In Playback, cue points are
inserted in the current cue list. In Record, cue points are appended to the
current cue list.
1.
Put the unit into play or record.
1.
Put the unit into play or record.
2.
At the desired timecode press the
Take
button. The new Take number will
be momentarily displayed.
2.
At the desired timecode press the
Take
button. The new Take number will
be momentarily displayed.
Press the
Time Remaining / Cue Count
button to permanently display the
current Take number on the lower alpha-numeric display.
Press the
Time Remaining / Cue Count
button to permanently display the
current Take number on the lower alpha-numeric display.
Presetting Cue Point Counters
Presetting Cue Point Counters
The procedure is identical for each of the four cue point types, so only the
procedure for Take Points is described.
The procedure is identical for each of the four cue point types, so only the
procedure for Take Points is described.
•
Press
the
Stop
button if the unit isn’t already in Stop.
•
Press
the
Stop
button if the unit isn’t already in Stop.
•
Press
the
Take
button.
The number shown in the alpha numeric display represents the number
that will be entered when the
Take
button is next pressed.
•
Press
the
Take
button.
The number shown in the alpha numeric display represents the number
that will be entered when the
Take
button is next pressed.
•
Use
the
Numeric Keypad
to enter a new cue point number.
•
Use
the
Numeric Keypad
to enter a new cue point number.
•
Press
the
Enter
button to make the change.
•
Press
the
Enter
button to make the change.
Auto Cue
Auto Cue
The GX9000 can be programmed to automatically add cue points while
recording. Two modes are available.
The GX9000 can be programmed to automatically add cue points while
recording. Two modes are available.
Genex Audio Inc
Page 56
Page 56
•
A Take Point can be added every time the unit starts recording.
•
A Take Point can be added every time the unit starts recording.
•
A Take Point can be added when the audio level on any channel exceeds
a preset level. An End Point is added when the audio level then drops
below the assigned level. Available thresholds are
Silence
,
-80dB
,
-70dB
,
-60dB
,
-50dB
, and
-40dB
. The
Silence
setting
represents a threshold of zero (digital silence). Note that the Silence
setting is only functional if actual zeros have been recorded between
segments. Otherwise the unit will never trigger.
•
A Take Point can be added when the audio level on any channel exceeds
a preset level. An End Point is added when the audio level then drops
below the assigned level. Available thresholds are
Silence
,
-80dB
,
-70dB
,
-60dB
,
-50dB
, and
-40dB
. The
Silence
setting
represents a threshold of zero (digital silence). Note that the Silence
setting is only functional if actual zeros have been recorded between
segments. Otherwise the unit will never trigger.
The
Off
setting disables the Auto Cue utility.
The
Off
setting disables the Auto Cue utility.
3
Take Log
T
3
.
AutoCue
UV
Off
Record
Silence
-80dB
-70dB
-60dB
-50dB
-40dB