GX9000 User manual
Rev 2.1
Recording
Audio Recording
Genex Audio Inc
Page 45
Making Initial Recordings
These simple instructions guide you through a process of preparing the
GX9000 to record audio. The instructions assume a disk is connected to the
recorder and is spun up and ready.
Audio Source
•
Press
the
Setup
button.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
buttons
to select the Audio | Input Source menu heading.
•
Use
the
Value Left
and
Value Right
buttons to select one of the
available input sources. The available sections will depend on the type of
I/O card fitted.
•
Press
the
Enter
button to store the selection.
Clock Source
•
Press
the
Setup
button.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
buttons
to select the Clocks | Clock Source menu. Heading.
•
Use
the
Value Left
and
Value Right
buttons to select a clock source.
•
Press
the
Enter
button to store the selection.
•
Check that the Clock Source LED is solidly lit and not flashing.
Disk Format
•
Press
the
Setup
button.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
buttons
to select the
Format | .DiskFmt
menu heading.
•
Use
the
Value
buttons to select the
FAT32
file format.
•
Press
the
Enter
button to format the disk.
•
At the prompt ‘Are you sure’ press the
Enter
button again.
•
The recorder will display the messages ‘
Building FAT
’ and
‘
Reading Disk
’. The disk is now formatted and ready for use.
File Format
•
Press
the
Setup
button.
•
Use
the
Rotary Wheel
and
Parameter Up
and
Parameter Down
to
selected the
Format | .FileFmt
menu heading.
•
Use
the
Value
buttons to select an available file format. The choices will
depend upon the Audio Source selected earlier.
•
Press
the
Enter
button to store the selection.
•
Press
the
Setup
menu button to return to normal timecode display.
•
Verify that the Signal Present LED’s are on for the tracks that are to be
recorded.