manualshive.com logo in svg

Genex GX9000, User Manual, Page: 37 / 64

Share
Download
Genex GX9000 User Manual Download Page 37

GX9048 User manual 

Rev 2.1 

Playback 

Genex Audio Inc 

 

Page 40 

•

 Press 

Play.

 

Loop Playback 

The Loop button allows you to constantly play between previously entered In 
and Out Points. If the Out Point time code is less than the In Point time code, 
playback will continue until the end of the disk for a Genex formatted disk or 
until 24:00:00:00 is reached for a FAT32 disk 

•

 Press 

the 

Loop

 button. The button LED will light to indicate Loop mode. 

•

 Press 

PLAY

. . 

When the time code is equal to the Out Point time code, playback will resume 
from the In Point time code. 

Locate Operations 

Locating Using Timecode 

Absolute Locate 

•

 Press 

the 

Locate

 button once to display a locate timecode in the lower 

alpha-numeric display.  

•

 Use 

the 

Numeric Keypad

 to enter a timecode value. 

•

 Press 

the 

Enter

 button to park the recorder at the selected timecode, or 

press 

Play

 to start playback from the selected timecode. 

Relative Locate 

•

 Press 

the 

Locate

 button once to display a locate timecode in the lower 

alpha-numeric display.  

•

 Press 

the

 -/Clear

 or 

+/Store

 button to start a positive or negative offset. 

•

 Use 

the 

Numeric Keypad

 to enter an offset. 

•

 Press 

the 

Enter

 button to park the recorder at the selected timecode, or 

press 

Play

 to start playback from the selected timecode. 

Locating Using Cue Points 

•

 Press 

the 

Locate

 button twice to display a cue point in the lower alpha-

numeric display. If there are no cue points on the disk, the message ‘no 
cues’ is displayed. 

•

 Rotate 

the 

Jog Dial 

to select a cue point. The timecode corresponding to 

the cue point is displayed in the upper display. 

•

 Press 

the 

Enter

 button to park the recorder at the selected timecode, or 

press 

Play

 to start playback from the selected timecode. 

Summary of Contents for GX9000

































































Reviews:

No comments