manualshive.com logo in svg

Genex GX9000, User Manual, Page: 36 / 64

Share
Download
Genex GX9000 User Manual Download Page 36

GX9048 User manual 

Rev 2.1 

Playback 

Playback 

Genex Audio Inc 

 

Page 39 

Audio Playback 

Genex File Format 

•

 Press 

the 

Play

 button.  

AES31 Audio File 

First, it is necessary to open an ADL project if one isn’t open already 

•

 Press 

the 

Setup 

button. 

•

 Rotate 

the 

Jog Dial

 to select the Projects menu. 

•

 Press 

the 

Parameter Down

 button to display the Open File menu 

•

 Press 

the 

Value Left

 and 

Right

 buttons to select an ADL Project file. 

•

 Press 

the 

Enter 

button to open the file. 

The display will show the messages 

Opening File

 and 

Scanning 

Files

 followed by a count, meaning that the recorder is checking all the 

audio files referenced by the project for errors. 

The unit locates to the first time code referenced in the ADL play list. 

•

 Press 

Play.

 

DSDIFF Audio File 

It is first necessary to open the DSD-IFF audio file 

•

 Press 

the 

Setup 

button. 

•

 Rotate 

the 

Jog Dial

 to select the Projects menu. 

•

 Press 

the 

Parameter Down

 button to display the Open File menu 

•

 Press 

the 

Value Left

 and 

Right

 buttons to select a DFF or DF0 file. 

•

 Press 

the 

Enter 

button to open the file. 

The display will show the messages 

Opening File

 and 

Scanning 

Files

, meaning that the recorder is checking the audio files for errors. 

The unit locates to the first time code in the file. 

A DSDIFF file is an interleaved file that can contain between one and eight 
audio channels. The 

Format | File

 menu will display the number of 

tracks in the file. 

•

 Press 

Play.

 

AES31-DSD Audio File 

First, it is necessary to open an ADL project if one isn’t open already 

•

 Press 

the 

Setup 

button. 

•

 Rotate 

the 

Jog Dial

 to select the Projects menu. 

•

 Press 

the 

Parameter Down

 button to display the Open File heading 

•

 Press 

the 

Value Left

 and 

Right

 buttons to select an ADL file. 

•

 Press 

the 

Enter 

button to open the file. 

The display will show the messages 

Opening File

 and 

Scanning 

Files

 followed by a count, meaning that the recorder is checking the audio 

files referenced by the project for errors. 

The unit locates to the first time code referenced in the ADL play list. 

Summary of Contents for GX9000

































































Reviews:

No comments