GX9000 User manual
Rev 2.1
Clocks
Digital Clocks
Genex Audio Inc
Page 34
Clock Source
When transferring digital data to and from an external device, it is essential to
synchronize the source and destination devices. The choices are different for
PCM and DSD modes.
PCM and DSD
•
Press
the
Setup
Button
•
Use the Rotary Wheel to select the
Clocks
menu.
•
Press
the
Parameter Down
button and use the
Rotary Wheel
to select
the
Clk Src
heading.
•
Use
the
Value Up
and
Value Down
Buttons to select a clock source. The
table below shows the available selections.
3
Clocks
T
3
.Clk Src
T
UV
Master
The unit generates clocks internally.
AES
Inp
Use in PCM mode only. The unit
automatically locks to the first available
AES audio input.
Ext
Clk
The unit locks to a word clock fed into
the External Clock Input BNC connector
on the rear panel.
Vid
--.--
The unit locks to a Black and Burst
video signal fed into the unit via the
Video Input BNC connector at the rear.
The video rate is automatically detected
and displayed.
MADI
The unit locks to the incoming MADI
stream if MADI a is fitted
•
Press
the
Enter
button to confirm the selection.