manualshive.com logo in svg

Genex GX9000, User Manual, Page: 4 / 64

Share
Download
Genex GX9000 User Manual Download Page 4

GX9000 User Manual 

Rev 2.1 

Transport Controls 

Transport Controls 

 

Genex Audio Inc 

 

Page 7 

 

Play 

Press the 

Play

 button to start forward play at x1 speed. The upper alphanumeric display shows the 

current time-code. 

Stop 

Press the 

Stop

 button to cancel the current transport mode. 

Fast Forward and Fast Reverse 

The operator can use the 

Fast Forward

 and 

Fast Reverse 

buttons to emulate the locate functions of 

a tape deck. Repeated pressing doubles the search speed up to a maximum x32 in either direction. 

Fast Forward automatically stops at 24:00:00:00 and Fast Reverse automatically stops at 
00:00:00:00. Pressing 

Play

 from either Fast Reverse or Fast Forward instantly puts the unit into Play. 

Pressing 

Stop

 instantly stops the unit. Audio output is muted during Fast Forward and Fast Reverse. 

The 

Fast Forward

 and 

Fast Reverse 

buttons are not disabled when in record; the unit will drop out of 

record and start spooling. 

±10 Seconds 

Press the 

+10

 button to advance the unit 10 seconds in the forward direction. Press the 

-10

 button to 

retard the playback position by 10 seconds. If the unit is stopped when either button is pressed the 
unit is parked at the new timecode position. If the unit is in play when the buttons are pressed, 
playback continues at the new timecode. The 

+10

 and 

-10

 buttons are disabled when in record. 

Previous and Next 

The 

Previous

 button moves the transport to the first cue point prior to the current location. The 

Next

 

button selects the next cue point ahead of the current location. If the unit is in Play when either button 
is pressed, playback continues from the new location, otherwise the unit is parked at the new location. 
The 

Next 

and 

Previous 

buttons are disabled when in record. 

Summary of Contents for GX9000

































































Reviews:

No comments