Document #: GP-UM-PDLE-101-11
Page 55 of 61
PDL Waveform Variations
Trigger
As described in the front panel control section, the waveform generation modes can be
operated in either standard or triggered operation modes. Trigger settings are controlled
by two buttons in the second row at the top of the screen:
Trigger on/off:
enables/disables triggered operation
Trigger edge (rise/fall)
selects whether the PDLE triggers on the rising or falling
edge of the trigger pulse
Triangle Waveform
The triangle waveform mode generates a triangular variation with user-set endpoints and
frequency.
Click the “Triangle Enable/Disable” button to enter triangle mode. The interface screen is
displayed above.
The indicator boxes in the middle of the screen display the waveform/trigger status,
frequency, and scan limits.
Trigger on/off
button
Trigger edge selection button
Triangle
Enable/Disable
Summary of Contents for PDLE-101
