GETTING STATIC IP • •
(Please Wait)
↓
FIX: 191.168.0.111
* Static Mode Set
Set Static IP:
Allows the user to set the static IP address, Net Mask, Gateway, Name Server, and Port
for Ethernet communication using static IP addressing. The setup screens for this option
are as follows:
>SET IP (Static)
↓
a. IP: 192.168.000.062
>SET IP (Static)
↓↑
b. NM: 255.255.255.000
>SET IP (Static)
↓↑
c. GW: 192.168.000.001
>SET IP (Static)
↓↑
d. NS: 192.168.000.002
>SET IP (Static)
↑
e. PORT: _23
The “>SET IP (Static)” line writes the settings to memory. Use the up and down arrows
to move between parameter setting options (the cursor will blink on the option letter). To
set a particular parameter, press the ENTER key to move the cursor from the option letter
to a parameter setting position. Use the left and right arrow keys to move between digits
and the up and down arrow keys to increment the highlighted digit. Press the ENTER key
to move the cursor back to parameter selection (cursor blinking on the option letter).
Document #: GP-UM-PDLE-101-11
Page 24 of 61
Summary of Contents for PDLE-101
