To re-establish a lost connection or to switch to a different communication port, select a
port from the port selection menu and click the “Establish Connection” button.
The communication interface selection button at the top left of the screen can be used to
switch between Ethernet and other communication interfaces. After this button is used,
the connection will have to be re-established by typing the IP address in the IP address
box (for Ethernet) or selecting a communication port (for other interfaces) and clicking
the “Establish Connection” button.
Single PDL value setting
The default screen after communication with the PDLE is established is the single PDL
value setting screen. This operation mode allows the user to set a single, static PDL
output value.
The indicator boxes in the middle of the screen show the latest PDL value and
wavelength setting.
To change the PDL or wavelength setting, type the desired value in the corresponding
box at the bottom of the screen and either press ENTER or click outside the text box
whose value has just been changed.
Ranges:
PDL:
0.1 to 20 dB
Wavelength: 1520 to 1570nm
Document #: GP-UM-PDLE-101-11
Page 54 of 61
Summary of Contents for PDLE-101
