Model FL3102
42
7.7.27 Comm 1 Only Noise Flag Errors
A read indicates the number of Comm 1 Only Noise Flag Errors that occurred in
the slave device. The maximum count is 255 and then the counter will rollover to
zero and begin counting again.
7.7.28 Comm 1 & 2 Framing Errors
A read indicates the number of Comm 1 & 2 Framing Errors that occurred in the
slave device. The maximum count is 255 and then the counter will rollover to
zero and begin counting again.
7.7.29 Comm 1 or 2 Message Interval
A read indicates the time interval in milliseconds between Comm 1 or 2 Message
Intervals. The maximum time interval indicated is 255.
7.7.30 Comm 2 Only Total Receive Errors
A read indicates the total MODBUS Comm 1 Only Receive Errors that occurred
in the slave device. The maximum count is 255 and then the counter will rollover
to zero and begin counting again.
7.7.31 Comm 1 Only SCI Errors
A read indicates the number of Comm 1 Only SCI (Serial Communications
Interface) Errors that occurred in the slave device. The maximum count is 255
and then the counter will rollover to zero and begin counting again.
7.7.32 Clear Comm 1 & 2 Errors
Writing a 1 to the bit activates the Clear Comm 1 & 2 Errors function which resets
all of the MODBUS Comm Error counters to zero. The function is active
momentarily and will reset automatically after being used.
Function
Bit (LSB)
Access
Enable 1
Read/Write
Disable
0
Read/Write
Figure 51 Comm 1 & 2 Errors
