9
Form No. 5500-32 Rev C
Code: +0700092EN REV 3.2 04APR2022
ENG
.25” Dia.
(4) Holes
8.30
1.76
.90” Dia.
UP
2” Sq.
3” Sq.
Fig. 3.e
Side Installation Horizontal Duct
Height >8”
1/3 Height
Fig. 3.f
Side Installation Vertical Duct
=
=
8” Min
Fig. 3.g
Important:
DO NOT introduce steam
into a duct that has interior insulation.
Steam Nozzle (optional)
The optional steam nozzle (See Fig. 3.h. and Table 3.d.) can be
used for horizontal surface installations (i.e. the bottom of a
horizontal duct) or vertical surface installations (See Fig. 3.i.).
A condensate hose is required. To install the steam nozzle,
cut a 2-1/2” round hole in the duct. Apply silicone sealant to
the mounting plate and insert the nozzle through the hole
and secure with sheet metal screws. Connect the steam and
condensate hoses using the hose clamps supplied. Select
an accessible location on the duct, allowing at least 36” of
straight duct (no elbows or obstructions) after the point where
the steam nozzle will be installed and the clearances can be
maintained as per the following drawings.
F
H
G
I
C
A
B
B
D
A
A
E
B
A
Steam Inlet
Condensate drain
Apply silicone
sealant to this face
Fig. 3.h
Inches
mm
A
1.24”
31.5 mm
B
1.96”
50 mm
C
2.20”
56 mm
F
2.26”
57.5 mm
E
3.93”
100 mm
F
0 0.31”
0 8 mm
G
0 0.86”
0 22 mm
H
0 1.18 “
0 30 mm
I
0.87”
22 mm
Tab. 3.d
Summary of Contents for GeneralAire 5500
