General Filters GeneralAire 5500, Installation And User Manual

Page: 36 / 82

30
8. TECHNICAL SPECIFICATIONS
SPECIFICATION DESCRIPTION NOTES
Capacity / VAC / kW
4.9 lbs/hr (2.2 kg/h) / 115 VAC 1-phase 50-60 Hz / 1.86 kW
9.9 lbs/hr (4.5 kg/h) / 230 VAC 1-phase 50-60 Hz / 4.05 kW
Steam pressure 3.81 in WC / 950 Pa (.137 PSI)
Dimensions (inches / mm) 21” H x 13” W x 8.25” D / 533mm H x 343mm W x 210mm D
Weight empty/packaged/installed
with water (pounds / kilograms)
16 / 26 / 24 lbs. (7.3 / 12 / 11 kg)
IP class IP20
Electrode power cables AWG12
Power relays (amps) 2 x 30 On board
Ground connection Screw
Input water type Potable water No demineralized or softened water
Conductivity range (microSiemens) 125-1250 µS/cm
Water fill connection
1/4” O.D. Compression Adapter to 3/4” BSP
Water fill - instant flow 0.09 – 0.16 gpm (0.35 – 0.60 l/min)
Drain hose ¾” ID x 10 ft. drain hose supplied (19 mm ID) From bottom of unit
Drain water temp F / C < 140°F / < 60°C Drain tempering device
Drain flow
Initial Max drain rate using ¼” OD supply tubing and full cylinder – approx 1.1 gallons for first 15
seconds of drain cycle (~4.4 gpm (13.2 l/min))
Initial Max drain rate using hose with ¾” BSP fitting – 6.3 gpm (23.8 l/min)
Average drain rate – 3.8 gpm (14.4 l/min) (measured over a one minute period starting with full
cylinder)
Serial communication DS485
Unit voltages Primary 115 / 230 Volts AC / Control Wiring 12 Volts DC
Electrical requirements Require AWG12 external power wires to electrical panel with a dedicated 20A
Max output
28.5 GPD max. If unit is not config.d (section 4.4) then default setting from factory is 20.9 GPD at
230V
Steam hose 6‘ blue steam hose ID 7/8” (22mm), OD 1 ¼“ (30mm), (GFI #7525)
8“ Steam manifold (standard) 8“ steam manifold supplied with duct mounting kit
OPTIONAL
GF-12502 air pressure switch Actuated by positive, negative or differential pressure of .05“ W. C. or more (GFI #7021)
RMB35 room steam kit 230V Includes room blower assembly and grille package (GFI #7660)
Steam nozzle Optional accessory can be used for bottom duct installation (GFI #7500 / CGF#GF-20-1)
GF-DPO30KIT Optional accessory 12" length steam distribution manifold (GFI #7521)
GF-DP045KIT Optional accessory 17.5" length steam distribution manifold (GFI #7522)
FIELD SUPPLIED
Copper tubing OD 3/4" to fit ID of blue steam hose
Inline pre-filter Any activated carbon element and particulate element rated for 5 micron or less and min 25 GPM
Condensate pump
3 gpm min. flow at 0 head and 1 gallon reservoir min. The technician is responsible for selecting the
appropriate condensate pump for the installation
Tab. 8.a