Introduction & Specifications
SC-ADT Applications Overview
076R172-000
SpectraComm ADT
1-9
Issue 2
Installation and Operation Manual
A Terminal Server Application
SC-ADT device can be connected to up to 16 or 32 ports of local asynchronous customer
equipment. Each SC-ADT front panel port is a standard EIA-232 async interface that can be
configured as terminal server ports for the management of remote equipment through their craft
ports. To support more async ports, simply add more SC-ADT units to the ethernet segment at each
site as required. Craft equipment attached to the SC-ADT can be managed from anywhere in the
customer's network via Ethernet LAN or modem dial-in access. The SC-ADT device itself is only
required at craft device sites.
shows Users A, B, C and D making a Telnet or Dial-Up
connection to Craft Devices A, B, C and D, respectively.
Telnet and Dial-in Access
•
Telnet users have authenticated access via LAN or modem to any SC-ADT async port, or can
select any connected device from a convenient port menu.
•
Dial-in users employ the SC-ADT internal modems (if so equipped) or one of two external
modems over the PSTN. The external modems use async Port 1 or Port 2. The integral modems
use the modem/line RJ45 connector at the shelf/enclosure rear panel.
•
Dial-in users connect to SC-ADT in Terminal Emulation mode using applications like
HyperTerminal or in Dial-up Networking mode for standard IP access. Multiple dial-in users
may establish simultaneous management sessions to separate ports, and can access one terminal
server port after another without having to disconnect and redial the modem connection.
Note
If there is a LAN connection at the SC-ADT site, several users may Telnet simultaneously over the LAN to
additional craft devices as long as they are connecting to different ports.
Figure 1-3
Terminal Server Applications via Telnet, Dial-Up and IP Access
SC-ADT SITE
Authenticated
access via LAN to
SC-ADT-conected
craft devices.
PSTN
LAN
ROUTER
or SCIP
SC-ADT shown with
two internal modems.
ROUTER
or SCIP
General
DataComm
1
8
2
3
4
5
6
7
ON
AL
INS
TM
ENET
1
MDM
1
MDM
2
9
16
10
11
12
13
14
15
SC ADT
1-8
9-16
POR
T
Terminal
Server Ports
9 - 16
Terminal
Server Ports
1 - 8
Port 1
Port 2
Craft
Device
A
USER "A"
REMOTE TELNET
Access
USER "B"
USER "D"
USER "C"
LOCAL TELNET
Access
Craft
Device
B
Port 9
Port 10
Craft
Device
C
Craft
Device
D
IP
NETWORK
DIAL-UP
Access to any
SC-ADTsite
with modem.
DIAL-UP
Access to any
SC-ADTsite
with modem.
Summary of Contents for SpectraComm ADT 16-Port
Page 75: ......
