Introduction & Specifications
Product Overview
076R172-000
SpectraComm ADT
1-5
Issue 2
Installation and Operation Manual
Management
Smart CLI
The SC-ADT employs an interactive command line interface that will feel familiar to most field
personnel. Added features include auto-prompting for command arguments, recognition of
abbreviated commands, online help, command line recall and an advanced utility for generating
downloadable ASCII configuration files.
Enhanced Telnet Management
SC-ADT provides enhanced Telnet “cut-thru” to up to 32 craft devices via the front panel terminal
server connectors. Using a single IP address, remote devices can be accessed by a TCP port number
(2001 - 2032) or by selecting from user-defined device descriptions at the Terminal Server menu.
Remote Dial-Up Management
The SC-ADT can be managed via a password-protected dial-up connection from the PSTN when it
is connected to one or two external GDC V.34 modems at Port 1 and/or Port 2. Dial-up management
is also available through two integral modems when the SC-ADT device is so equipped from the
factory. The SC-ADT supports simultaneous dial-up management sessions via internal or external
modems.
Web Management
The SC-ADT supports direct web management via HTTP for internet-ready network monitoring.
An embedded web server agent allows Read or Read-Write access to the SC-ADT using popular
browsers. To enhance security, the SC-ADT supports web time-outs and password-protected access
over the web interface. HTTP services can also be disabled to block web access to SC-ADT devices.
SNMP Management
An embedded SNMP agent allows discovery, retrieval of statistics, alarm traps and Read access to
SC-ADT using any standard SNMP controller. SNMP access can be disabled to avoid hacks during
intervals of heightened security.
Note
SNMP support will not require a SpectraComm Manager (SCM) card co-located in the shelf.
TEAM Management
(Future Release)
This release of the SC-ADT supports auto-discovery and polling by GDC’s TEAM software (Total
Enterprise Access Management. TEAM uses HPOV APIs (Application Programmer Interfaces) to
integrate with HP OpenView Windows and other network management applications. In a future
release, the SC-ADT will be able to launch a direct Telnet or web-based CLI session from the map
window. For more information on the availability and operation of these additional features, refer
to later issues of this document or contact your GDC Sales Representative.
Note
TEAM support requires an SCM card at version 5.80 or greater and co-located in the shelf with the SC-ADT.
For more information, refer to the GDC TEAM Core documentation and Release Notes.
Summary of Contents for SpectraComm ADT 16-Port
Page 75: ......
