General DataComm SpectraComm ADT 16-Port, Installation & Operation Manual

Page: 27 / 76

Installation & Connections Overview
076R172-000 SpectraComm ADT 2-3
Issue 2 Installation and Operation Manual
Installing the SC-ADT
SC-ADT 16-port Device
1. Insert the SC-ADT card into any single slot of a SpectraComm shelf or enclosure until the card
makes contact with the backplane connectors.
2. Pull down the insertion/extraction tab on the front panel while firmly pushing the card until it
seats in the rear connectors.
3. Attach the card retention bar, if provided.
SC-ADT 32-port Device
1. The SC-ADT 32-port device is shipped from the factory as a two-card assembly: the SC-ADT
base card and the SC-ADT Expansion card. The two cards are fastened together by rear entry,
on-board signal connectors and stand-offs. Do not separate the cards.
1. Insert the cards into any two adjacent slots in a SpectraComm 5000 shelf or Multipak
enclosure until the base card makes contact with the backplane connector.
2. Pull down the insertion/extraction tab on the front panel of the SC-ADT base card while firmly
pushing both cards until they seat in the rear connectors.
3. Attach the card retention bar, if provided.
Note
If you are installing the SC-ADT in a SC 2000 shelf, do not wall-mount the shelf. Wallmounting does not
provide sufficient strain relief for the front panel cable assemblies.
Note
Using the card retention bar will ensure the SC-ADT device remains securely seated in the backplane
connectors.
Table 2-2 Shelf Systems and Optional Equipment
Item Description Part Number
SC 1001
Enclosures SpectraComm Standalone Enclosure, one slot, AC-powered, 115V 010M300-001
SpectraComm Standalone Enclosure, one slot, AC-powered, 220V 010M300-002
SC 1002 Enclosure SpectraComm Standalone Enclosure, one slot, DC-powered 010B301-006
SC 2000 Shelves SpectraComm 2000 Shelf, two slots, non-redundant power supply 010B226-001
SpectraComm 2000 Shelf, two slots, redundant power supply 010B226-002
SC 5000 Shelves MS-2 Mod. 1, Dual Modular 100/120 VAC 010M054-001
MS-2 Mod. 2, Dual Modular -48, 60 VDC 010M055-001
MS-2 Mod. 3, Dual Modular 220/240 VAC 010M056-001
MS-2 Mod. 7, (Mass Term) 100/120 VAC 010M073-001
MS-2 Mod. 8, (Mass Term) 220/240 VAC 010M074-001
MS-2 Mod. 9, (Mass Term) -48, 60 VDC 010M075-001
MS-2 Mod. 10, Dual Modular -48, 60 VDC (redundant power supplies) 010M070-001
MS-2 Mod. 12, (Mass Term) -48, -60 VDC (redundant power supplies) 010M076-001