Moxi GO II
™
User Guide
Page 74
Installing an insert
IMPORTANT: Make sure to unplug Moxi GO II USB/Power cable from system before
starting this procedure. Leaving it in place can result in damage to both the cable
and the system when the system is being tilted back (connectors can break).
1.
Using your left hand, push slightly down on the tray lever (NOT ALL THE WAY, ~1/3
depressed) for the cassette tray.
2.
Place back of the insert to the tray and align the insert rails with the tray guides (see
image below)
3. While continuing to hold the tray lever depressed, push the cassette insert into the
system.
Note: If significant resistance is encountered, try slightly raising/lowering the
tray lever while gently pushing on the insert.
Tray Guides
Insert Rails
