Moxi GO II
™
User Guide
Page 69
Instrument Firmware and Software Upgrades
This User Guide describes OS version 2.10 of the Moxi GO II™ firmware. The firmware may be
updated periodically. For information on the most up-to-date firmware, visit the ORFLO website
at www.orflo.com. Register your instrument in order to receive notification about relevant
firmware upgrades.
Upgrade Instructions:
1. Download the“Moxi_GO-II_firmware_v2.10_BETA-4.zip” file for the Moxi GO II from
https://gembio-
my.sharepoint.com/:f:/p/gdittami/EgTbVRRST8BOih63t6JwOnABscfxMsICOvVQ9BNNq
TOsxQ?e=t5WPf2
2. Unzip the files on the computer to be used for updating your GO.
Note: 52 Files are included in this update.
3. Plug the Moxi GO II into your computer (Mac or PC) using the
provided USB cable
4. Starting with the system powered off, place unit into “Firmware
Update” (“Orflo OS Loader”) mode by pressing (and releasing) the
start button quickly until the “Loader” text appears as the bottom
(typically takes 8 quick button presses, stop pressing when the text
appears. The loader mode is shown in the image to the right/top.
5. The Moxi GO II will appear as an external drive on the computer
(look for it in the Windows Explorer as “External Disk”). Drag all
(all 52) of the extracted files (not the folder, copy all the files at
once) onto this drive (or copy and paste them) onto the newly
mounted Moxi GO drive.
6.
WAIT FOR ALL FILES TO FINISH COPYING BEFORE
PROCEEDING (do not touch the Moxi GO II screen).
7. Safe-eject the Moxi GO II drive from your computer.
8. The Moxi GO II screen will have changed to the “USB File
Transfer” screen. Touch the “OK” button to start (image on
right/bottom). The unit will begin updating each file onto the
system and will automatically shut off upon completion. DO NOT
attempt to turn off the system prior to completion. If you have any
issues, please contact Orflo Technical Support at
or via phone at 855-879-6694.
9. At this point, the new firmware should be properly installed. Touch
the “Help” Icon and press “Next” three times to confirm the OS
version (see image below).
10. To migrate older data (that was on the 16Mb flash disk) to the new
4Gb µSD disk, follow the “Migrate and USB Quick Start Rev
1.0.pdf” guide instructions.
