Gemini TABLE TOP SYSTEM CDMP-6000 Operation Manual Download Page 6

Page: 6 / 23

CHANNEL ROTARY GAIN:

The

CHANNEL ROTARY GAIN

allows you

to boost the signal of each individual channel depending on how low
or high its input level is.

3 BAND EQUALIZER:

The

3 BAND EQUALIZER

adjusts the tone of

each

CHANNE

L by giving you a choice

frequencies (

BANDS

) to

adjust , from

LOW, MIDRANGE (MID)

and

HIGH’s

,you can use the

adjustment knobs to higher or lower the 3 separate frequencies till the
sound of the music program is appropriate for your listening
environment.

CHANNEL INPUT SELECTOR:

The

CHANNEL INPUT SELECTOR

switches allow you to choose which input will be controlled by that
channels corresponding volume

FADER

For example on

CHANNEL

(1) the

INPUT SELECTOR

allows you to

choose between

CD 1

and

PHONO 1/LINE 1

, and also on

CHANNEL (2)

the

INPUT SELECTOR SWITCH

will let you choose

between

PHONO 2/LINE 4

and

CD 2

CHANNEL VOLUME FADER

: After you have chosen which input you will

use with the

INPUT SELECTOR

the corresponding

CHANNEL FADER

will allow you to adjust the volume for that particular

CHANNEL

MICROPHONE VOLUME:

Allows you to adjust the volume of the

microphone signal. Both

MIC

inputs are controlled by the same rotary.

MASTER OUTPUT ROTARY KNOB:

The

MASTER OUTPUT

rotary knob

adjust the volume of the

MAIN MASTER

output.

CUE/PGM MIX ROTARY KNOB:

The

CUE/PGM MIX ROTARY KNOB

adjusts the mix between the CUE signal and the main output signal in
your

HEADPHONE MONITOR OUTPUT

CUE VOLUME ROTARY KNOB:

The

CUE VOLUME ROTARY KNOB

adjusts your

HEADPHONE MONITOR OUTPUT’S

volume.

CHANNEL CUE SELECTOR:

The

CHANNEL CUE SELECTOR

allows you

to choose which channel you wish to monitor in your headphones, to the
left is

CHANNEL (1)

to the right is

CHANNEL

(

VU METER:

The

CDMP-6000

has a stereo

VU METER

that allows you to

monitor the decibel levels of the

LEFT

and

RIGHT MASTER

output.

VU MASTER/CUE SWITCH:

This switch controls what output the

METER

will display, in the master position the

will display the

MASTER

output of the

CDMP-6000

and in the

CUE

position the left

will display the channel

(1)

‘s

CUE

output and the right

will display

channel

(2)

‘s CUE output.

CROSS FADER:

The

CROSS FADER

allows you to mix evenly from one

source to another. The

CROSS FADER

on the

CDMP-6000

is also re-

movable and if the need arises can be replaced.The

RG-45

(

RAIL-

GLIDE™

)

DUAL-RAIL CROSS FADER

, which has internal dual stainless

steel rails that allow the slider to ride smoothly and accurately from
end to end can be purchased from your local

GEMINI

dealer.

NOTE: WHEN USING THE CROSS FADER LIGHTLY GLIDE THE FADER
BACK AND FORTH. PRESSING DOWN ON THE CONTROLS CAN
BEND CONTACTS AND CAUSE A LOSS OF SOUND

GENERAL:

Type................................................................................Compact Disc Player
Disc Type...................................Standard Compact discs (12 cm & 8 cm)
Time Display......................Track Elapsed, Track Remain, or Total remain
Variable Pitch.......................................± 24% Slider with Resume Switch
Pitch Bend............................................................................± 24% Maximum
Instant Start....................................................................Within 0.03 seconds
Installation...........................................................................................19" each
Dimensions........................... 19" x 3.5" x 10" (482.6 x 88.9 x 254 mm)
Weight..........................................................Main unit: 11.35 lbs. (5.14 kg)

AUDIO SECTION:

Quantization......................................1 Bit Linear/Channel, 3 Beam Laser
Oversampling Rate..............................................................................8 Times
Sampling Frequency..........................................................................44.1 kHz
Frequency Response............................................................20 Hz to 20 kHz
Total Harmonic Distortion...................................................Less Than 0.05%
Signal to Noise Ratio..............................................................................85 dB
Dynamic Range........................................................................................85 dB
Channel Separation.................................................................85 dB (1 KHz)
Output Level...................................................................2.0 +/- 0.2V R.M.S.
Power Supply.......................................................AC 115/230V, 60/50 Hz

INPUTS:

Phono.............................................................................3mV,47 KOhm
Line..........................................................................150 mV, 27 KOhm
MIC...................................................................1.5 mV, 1 KO balanced

OUTPUTS:

Max..........................................................................20V Peak-to Peak
Rec.............................................................................225 mV, 5 KOhm

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.

1. UNSCREW THE FADER (B) SCREWS. DO NOT TOUCH INSIDE SCREWS (C) CARE-

FULLY

REMOVE OLD CROSS FADER AND UN-

PLUG CABLE (D)

2. PLUG IN THE NEW CROSS FADER INTO
CABLE (D) AND PLACE BACK INTO MIXER.

3. SCREW THE CROSS FADER TO MIXER
WITH THE FADER PLATE SCREWS (B)

4. REPLACE THE FACE OF THE MIXER AND

SCREW THE FOUR SCREWS BACK IN AND REPLACE THE FADER KNOBS.

CDMP-6000

MIXER SECTION:

FADER REPLACEMENT