Gemini TABLE TOP SYSTEM CDMP-6000 Operation Manual Download Page 4

Page: 4 / 23

Congratulations on purchasing the

Gemini CDMP-6000 CD Player

This state of the art

professional table top CD player

is backed by a 1 year

warranty*. Prior to use, we suggest that you carefully read all the instructions.

- Audio CD,CD-R, Mp3 compatible
- Plays mp3 files from USB storage device*
- BPM (TAP) Read Out
- Anti-shock using RAM buffer memory
- 2 Selectable Jog modes Pitch Bend/Search
- Multifunction scroll knob for Mp3 folder navigation
- Fader-Start capability
- One seamless loop per side with reloop
- Variable pitch control with three se/- 8,16 & 24%
- Fully programmable with repeat function
- 3-band EQ w/ Gain Control
-1/4” headphone output
- XLR and 1/4” mic input
- Auxiliary Inputs for Phono or Line devices

Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5 mW

INTRODUCTION:

CDMP-6000

FEATURES:

SAFETY SPECIFICATIONS:

PRECAUTIONS:

CONNECTIONS:

MAIN POWER RECEPTACLE:

This is a Standard 2-prong IEC power

connector. Connect the detachable linecord (included in the box with
your

CDMP-6000

) to the power receptacle, and plug the other end of

the linecord into an

outlet. The

CDMP-6000

has a universal power

supply that can accept any

voltage from

100 VAC to 240 VAC.

No need for voltage select switches. It will work virtually anywhere in
the world. It is less susceptable to voltage sags or spikes than conven-
tional power supplies, providing greater electro magnetic isolation and
better protection against

line noise

GROUNDING SCREW

When using (a) turntable(s), you will need to

ground the

RCA

cable(s) by screwing in the grounding fork(s) to the

GROUNDING SCREW

located on the rear panel of the

CDMP-6000

mixer. Attach a

PHONO

(Turntable) ground line to the silver

GROUND

THUMB SCREW

that is situated at the bottom middle of the rear panel.

MASTER XLR OUTPUT (BALANCED):

Allows you to connect bal-

anced

XLR

cables to

MASTER OUTPUT

of the

CDMP-6000

both the

RCA

and

XLR

outputs can be used at the same time but are both

controlled via the same

MASTER OUTPUT

MASTER RCA OUTPUT:

The

MASTER RCA

output connects the

mixer to your main amplifier using standard audio cables with

RCA

type connectors.

The

RECORD RCA OUTPUT

output jacks can be used to connect the

mixer to the record input of your recording unit, thus enabling you to
record your mix with

RCA

cables.

CONVERTIBLE PHONO/LINE INPUTS

: The

CDMP-6000

has 2

CON-

VERTIBLE (Switched) PHONO/LINE (PH/LN) RCA INPUTS

. The

switches which are located to the right and left of the

RCA

inputs for

channels 1 and 2 allow you to choose between a

PHONO

(Turntable) input or a

LINE

level (Mp3, CD, Tape player etc..).and

require the proper switching. When switched to the

position you

may use any Turntable with a magnetic cartridge, remember to con-
nect your ground wire (see

GROUNDING SCREW

) or there may be

a system hum.

MIC (MICROPHONE) INPUTS:

The main

MIC

or Microphone inputs

are located at the back right hand corner and front middle of the

CDMP-6000

and will accept any balanced and unbalanced XLR as

well a standard 1/4” connector. You can control the gain for the mic
(See

MICROPHONE VOLUME ABOVE

) above.

CUE/PGM MIX RO-

TARY KNOB:

The

CUE/PGM MIX ROTARY KNOB

adjusts the mix

between the CUE signal and the main output signal in your

HEAD-

PHONE MONITOR OUTPUT

POWER SWITCH:

Once you have connected all your cables and

made sure that the

VOLTAGE SELECTION SWITCH

is set correctly,

you can turn the

CDMP-6000

on by pressing the

POWER

button

to the

position.

FUNCTIONS:

1. Do not use this CD player at temperatures below

41°F/5°C

higher than

95°F/35°C

2. The apparatus should not be exposed to dripping or splashing,

and no objects filled with liquids such as vases should be
placed on the apparatus.

3. Place the unit in a clean and dry location.
4. Do not place the unit in an unstable location.
5. When disconnecting the power cord from the AC outlet,

always grasp it by the plug. Never pull the power cord.

6. To prevent electric shock, do not remove the cover or the bottom screws.
7. There are

NO USER SERVICEABLE PARTS INSIDE

. Please

refer to a qualified technician.

8. Do not use chemical solvents to clean the unit.
9. Keep the laser pickup clean by keeping the tray closed.
10. Keep this manual in a safe place for future reference.

DISC TRAY:

The

DISC TRAY

is where the

is held during loading,

unloading and playback, and holds both 12 cm and 8cm CD’s.
(

DO NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL

DAMAGE THE CD MECHANISM, USE THE OPEN AND CLOSE
BUTTONS

)

EJECT BUTTON:

Pressing the

EJECT BUTTON