Gehl Z17 GEN:2, Operator'S Manual

Page: 58 / 208

2-18
13. Operating Instructions
13-1-1. Walking check (visual inspection) around the machine
Before starting the engine, visually check the outside and underside of the machine as follows:
Check bolts and nuts for loose connections; check the fuel, oil, and water for leaks; and also check the
implement and the hydraulic system to see that they are operating properly. In addition, check the elec-
trical wiring for loose connections and for dust deposits in the heat build-up areas.
Check the following points before initial start-up for the day.
(1) Checking the implement, hydraulic cylinders, linkages, and hoses for damage, wear and
loose connections
Check the implement, hydraulic cylinders, linkages, and hoses for damage, wear and loose connections.
If any abnormality is found, take corrective action.
13-1. Checking before starting the engine
• If there are any combustibles in any heat build-
up areas, or if there are any fuel and/or oil leaks,
a fire can result.
• Check for possible fire causes carefully. If there
is anything abnormal, be sure to take corrective
action or contact your dealer.
(1)
(5)
(4) (7) (6)
(7) (8) (2)(3)(9)
(1)
020319-00X
Courtesy of Machine.Market