Gehl Z17 GEN:2, Operator'S Manual

Page: 18 / 208

1-6
These instructions should be strictly followed
for the safety of you, others and your machine.
WARNING
8. Operating Precautions
• Before starting the machine, check to see if there are any haz-
ards in your working area.
• Examine the terrain and soil, and decide the best way to do the
work.
• When working on the street, provide a signal person or fence for
the safety of vehicles and pedestrians.
• If there are underground utilities at the work site, such as water pipes,
gas pipes, high-voltage conduits or others, contact the responsible
companies to locate them exactly, so as not to damage them.
• Before operating the machine in water, or crossing a creek, con-
firm the condition of the submerged ground, the water depth and
the water flow speed, and make sure that the depth is within the
allowable level.
For allowable water depth, refer to Section "13-11. Precautions for working".
• Wood chips, dead leaves, trash and other flammable materials in
proximity to the engine are hazardous as they may cause fire.
Always check and keep your machine clear of these flammable
materials.
• Check for any leaks from fuel, lube oil or hydraulic oil lines. Repair
faults and clean spilled oil as necessary.
For additional information, refer to Section "13-1. Checking
before starting the engine".
• Check to see where fire extinguishers are located and know how
to use them.
• Dirt, oil and snow on the floor, levers, handrails or steps are slippery and hazardous. Remove them
all completely.
• Keep parts and tools away from the operator's seat as they may damage the control levers or
switches or create other hazards.
8-1. Precautions before starting the engine
Ensure the safety of your workplace
Prevent fire
Inspect around the operator's seat
000286-00X
000287-00X
Courtesy of Machine.Market